PRODUCTS
Flat panel digital ultrasonic testing car
The PXUT-PT10 flat digital ultrasonic testing car is a lightweight hand pushed steel plate testing car. The structure adopts the lever principle to tightly fit the combined probe to the surface of the steel plate, and the booster water pump supplies water to maintain good coupling effect. The probe is an independent structure, and the probe spacing can be changed arbitrarily to meet different detection process requirements. The software has the functions of A-scan for each channel and C-scan for the entire steel plate splicing; Equipped with independent calibration of flaw detection sensitivity for each channel and simultaneous calibration function using a large flat bottom; Provide inspection record form and inspection report function. Support customized design of software functions and probe layout to meet different testing standards requirements.
Main features:
● The ultrasonic module and probe module of the car adopt modular design, which can be quickly adjusted and combined according to the detection needs to meet different application scenarios.
● Single channel test block calibration is possible, and other flaw detection channels automatically gain based on the calibrated channels to ensure consistent calibration wave height for each channel; It can also be calibrated simultaneously through multi-channel reflection waves from the flat bottom of the workpiece.
● 10 probes evenly distributed. The diameter of the probe chip is 30mm. The probe spacing is adjustable, and the maximum coverage of the probe is not less than 700mm.
● The water pump supply system has infinitely adjustable spray volume and good coupling effect.
● Equipped with C-imaging function, it can splice the C-imaging map of the entire steel plate.
● Equipped with sound and light alarm function.
● Full data recording and playback function.
● It has the function of testing record table and testing report, and the content can be customized according to customer requirements.
Technical parameter:
project | index | project | index |
Sensitivity margin for flaw detection | ≥56dB | Probe mode |
Single/dual probe working modes |
Attenuator error | Every 12dB ± 1dB | Linear inhibition | 0%~80% |
Horizontal linear error | ≤0.5% | detection mode | Full wave/RF wave |
Vertical linear error | ≤2% | Repetition frequency | Each channel is continuously adjustable from 10Hz to 2000Hz |
dynamic range | ≥30dB | Display mode | A display and C display |
Resolution | ≥30dB | Alarm output | Sound and light alarm prompts, and intuitive display of alarm channels |
Electric noise level | ≤10% | Usage environment | Indoor and outdoor, normal working conditions |
Number of channels | ≥ 10 | Temperature requirements | -30℃~70℃ |
working frequency | 0.2MHz~15MHz | Humidity requirements | Relative humidity of 20% to 95%, no condensation |
Gain range | 0~100dB | Power requirements | AC:220V /50Hz DC:12V |
Detection range | 0mm~5000mm (steel longitudinal wave) | Power requirements | 30VA |
Pulse shift range | -10mm~500mm (steel longitudinal wave) | Detection range | 0~250mm |
Working frequency range | Available in two levels: 1.5MHz~3MHz/3MHz~6MHz | Equipment use probe | Single crystal/twin crystal options available |
Technical parameters of related products are subject to change without prior notice.
Consult
Professionals will connect with you to clarify your needs

Sales Hotline:
Address: 969 Yonghe Road, Union Science and Technology Park, Nantong, Jiangsu, China
After-sales hotline: +86-513-85296971
Supervision Tel: +86-513-85284918
E-mail: sales@ut-world.com

WeChat public platform
UNION
底部版权
